BMW E46 Reinforcement cups for front 2points on the rear subframe

Vorshlag developed these reinforcement panels for the E46 M3 factory tubular subframe. When used with extra large tires, high power or high aero

BMW E46 M3 Rear Subframe Reinforcement

The BMW E46 has some problems with the factory chassis. The rear subframe mounts at 6 points through sloppy rubber bushings. Over enough time the

BMW E46 Rear Frame-to-Subframe Reinforcement

Technical Datasubframe reinforcement plates :12 gauge (min .100 or 2.5mm) The two 3 x 3.5 plates: 16 gauge (used to patch the trunk area if required)Warrantyone year for any manufacture defectsPackage IncludesExactly as pictures showNote1. No Installation Instruction was included 2.

BFO Reinforcement / Repair Kit Rear Subframe for BMW 3 Series E46 1998

E46 Complete Chassis Reinforcement Kit - (323, 325, 328, 330, and M3) Non M / Bare Shock Reinforcment

E46 Complete Chassis Reinforcement Kit - (323, 325, 328, 330, and M3) Non M / Bare Shock Reinforcment

Technical Datasubframe reinforcement plates :12 gauge (min .100 or 2.5mm) The two 3 x 3.5 plates: 16 gauge (used to patch the trunk area if required)Warrantyone year for any manufacture defectsPackage IncludesExactly as pictures showNote1. No Installation Instruction was included 2.

BFO Reinforcement / Repair Kit Rear Subframe for BMW 3 Series E46 1998

Vorshlag developed these reinforcement panels for the E46 M3 factory tubular subframe. When used with extra large tires, high power or high aero

BMW E46 M3 Rear Subframe Reinforcement

If you have a rear panel and cannot install a 6point bar this is a MUST HAVE part for your chassis. You will strengthen the front 2 mounting points of

BMW E46 Reinforcement cups for front 2points on the rear subframe

VinceBar Sub Frame Reinforcement Kit! [Archive] - BMW E46 330 ZHP For Sale Forum

BMW E46 Rear Subframe Reinforcement — Performance Eurowerks - BMW Porsche Exotic Car Tuning