Step-up step-down buck boost converter

4.7 (672) · € 100.00 · Auf Lager

Adjustable step-up step-down buck boost converter As mentioned in the description a step-up step-down, buck-boost converter board will keep a pre-set voltage even if the voltage is below (step-up) or above (step down) the pre-set value. It works especially great where the power source fluctuates a lot e.g. solar panels. Please note that the trim pot that is used to adjust the output of the module needs to be turned quite a few times before you can see a change in the output. Buck boost converter specifications Input Range: 3.5V - 28V Output Range: 1.25V - 26V Input Current: 3A ( max ), no-load 18mA (5V input, 8V output, no-load is less than 18mA. Higher the voltage, the greater the load current. )Rated at 1A, 3A for short periods with heatsink Conversion efficiency:<94% ( the greater the pressure, the lower the efficiency ) Switching
Adjustable step-up step-down buck boost converter As mentioned in the description a step-up step-down, buck-boost converter board will keep a pre-set voltage even if the voltage is below (step-up) or above (step down) the pre-set value. It works especially great where the power source fluctuates a lot e.g. solar panels. Please note that the trim pot that is used to adjust the output of the module needs to be turned quite a few times before you can see a change in the output. Buck boost converter specifications Input Range: 3.5V - 28V Output Range: 1.25V - 26V Input Current: 3A ( max ), no-load 18mA (5V input, 8V output, no-load is less than 18mA. Higher the voltage, the greater the load current. )Rated at 1A, 3A for short periods with heatsink Conversion efficiency:<94% ( the greater the pressure, the lower the efficiency ) Switching frequency:400KHz Output Ripple:50mV ( the higher the voltage, the greater the current, the greater the ripple ) Load Regulation:± 0.5% Voltage Regulation:± 0.5% Operating Temperature:-40 - +85 Dimensions:48mm * 25mm * 14mm ( L * W * H )

Adjustable step-up step-down buck boost converter

As mentioned in the description a step-up step-down, buck-boost converter board will keep a pre-set voltage even if the voltage is below (step-up) or above (step down) the pre-set value. It works especially great where the power source fluctuates a lot e.g. solar panels.

Please note that the trim pot that is used to adjust the output of the module needs to be turned quite a few times before you can see a change in the output.

Buck boost converter specifications

Input Range: 3.5V - 28V

Output Range: 1.25V - 26V

Input Current: 3A ( max ), no-load 18mA (5V input, 8V output, no-load is less than 18mA. Higher the voltage, the greater the load current. )
Rated at 1A, 3A for short periods with heatsink

Conversion efficiency:<94% ( the greater the pressure, the lower the efficiency )

Switching frequency:400KHz

Output Ripple:50mV ( the higher the voltage, the greater the current, the greater the ripple )

Load Regulation:± 0.5%

Voltage Regulation:± 0.5%

Operating Temperature:-40 - +85

Dimensions:48mm * 25mm * 14mm ( L * W * H )

Your no. 1 DIY robotics store in South Africa for micro robot and Arduino robot kits. View our ESP32 and Arduino projects and big range of microcontroller electronic parts like transducers, encoders. electronic modules & sensors to build DIY electronic and robot projects. We also have fun STEAM education kits for kids.