M&W 36-Pin CDI Ignition Connector Plug Kit Pro-16 Pro-18 Pro16 Pro18 – KSV Looms

4.8 (255) · € 23.99 · Auf Lager

Genuine 36-pin connector kit for use with many M&W CDI ignition units.Known applications include Pro-16B, Pro-16C, Pro-16D, Pro-18B, Pro-18C, and Pro-18D.Kit includes the following; Connector housing x 1 Secondary lock x 1 Wire seal x 36 (sized for M22759 Tefzel wire) Socket terminal (gold, 20-16 AWG) x 40 (four ex
Genuine 36-pin connector kit for use with many M&W CDI ignition units.
Known applications include Pro-16B, Pro-16C, Pro-16D, Pro-18B, Pro-18C, and Pro-18D.
Kit includes the following;

Connector housing x 1
Secondary lock x 1
Wire seal x 36 (sized for M22759 Tefzel wire)
Socket terminal (gold, 20-16 AWG) x 40 (four extra terminals provided)

Raychem SCL is a semirigid, encapsulant-lined, heat-shrinkable tubing use for a variety of applications when building looms. Specifications per manufacturer;

Description: SCL is encapsulant-lined, heatshrinkable tubing that provides moisture resistance, strain relief, and electrical insulation for electrical splices, terminations, breakouts, and mechanical connections.
Shrink ratio: 2:1
Temperature rating: 135¸C (275¸F)
Full recover temperature: 135¸C (275¸F)
Continuous operating temperature: 55¸C (-67¸F) to 110¸C (230¸F)

Item is sold in 1' increments.

*Although these are more commonly sold in 4' sticks, this is sold PER FOOT.

Please select diameter size when ordering.

Raychem ATUM a high-shrink-ratio, adhesive-lined polyolefin tubing used for a variety of applications when building wiring looms. The adhesive in ATUM tubing bonds to a wide variety of plastics, rubbers, and metals, including polyethylene, aluminum, steel, and copper. Specifications per manufacturer;

Environmentally seals and protects a wide variety of electrical applications, including back end connector sealing, breakouts, and connector-to-cable transi- tions. High expansion ratio makes it possible to repair most damaged cable jackets without removing connectors.
Shrink ratio: 4:1
Minimum shrink temperature: 80°C (176°F)
Minimum full recover temperature: 110°C (230°F)
Operating temperature: -55°C (-67°F) to 110°C (230°F)

Item is sold in 1' increments.

*Although these are more commonly sold in factory 4' sticks, we cut them down and this is sold PER FOOT.

Please select diameter size when ordering.

Genuine Delphi GT150 3-pin pressure transducer connector kit. This version of the connector is push-to-seat for easier terminal installation, and includes the secondary lock.

Kit is available in single, five, or ten pack and includes the following;

Single Pack

Connector housing x 1
Wire seal x 3 (sized for M22759 Tefzel wire)
Socket terminal (22-20 AWG) x 4 (one extra provided)

Five Pack

Connector housing x 5
Wire seal x 15 (sized for M22759 Tefzel wire)
Socket terminal (22-20 AWG) x 18 (three extra provided)

Ten Pack

Connector housing x 10
Wire seal x 30 (sized for M22759 Tefzel wire)
Socket terminal (22-20 AWG) x 36 (six extra provided)

If you are unsure on fitment, please reference photos carefully. Item pictured is exact item you will receive.

Genuine factory OEM connector kit for the Nippon Denso 2-pin fuel injector, compatible with stock terminals and wire. This is the 'high tag' or 'top slot' version of the Nippon Denso injector which fits many OEM injector applications and the Injector Dynamics ID2000 injector. If you need to replace a broken or cracked OEM housing, simply de-pin and replace with these, crimping on new terminals only if desired.

Kit is available in single, three, four, six, or eight pack and includes the following;

Single Pack

Connector housing x 1
Wire seal x 2 (sized for M22759 Tefzel wire)
Socket terminal (22-16 AWG) x 3 (one extra provided)

Three Pack

Connector housing x 3
Wire seal x 6 (sized for M22759 Tefzel wire)
Socket terminal (22-16 AWG) x 7 (one extra provided)

Four Pack

Connector housing x 4
Wire seal x 8 (sized for M22759 Tefzel wire)
Socket terminal (22-16 AWG) x 10 (two extra provided)

Six Pack

Connector housing x 6
Wire seal x 12 (sized for M22759 Tefzel wire)
Socket terminal (22-16 AWG) x 14 (two extra provided)

Eight Pack

Connector housing x 8
Wire seal x 16 (sized for M22759 Tefzel wire)
Socket terminal (22-16 AWG) x 20 (four extra provided)

If you are unsure on compatibility please reference photos carefully. Photo is of actual item you will receive.

Genuine OEM connector kit for the 2000-2005 Honda S2000 F20/F22 cam position sensor, compatible with stock terminals and wire. This connector kit will fit all 1999-2003 (AP1), and 2004-2005 (early AP2) vehicles, which have two cam sensors. If you choose to replace a deteriorated OEM housing, simply de-pin and replace with this one, crimping on new terminals only if desired.

Kit includes the following

Connector housing x 1
Wire seal x 2 (sized for M22759 Tefzel wire)
Socket terminal (22-20 AWG) x 3 (one extra provided)
Secondary lock x 1

Genuine new stock 20 AWG M22759/32 Tefzel Wire.

Specifications are below;

Conductor material: Tinned plated copper
Insulation: Single layer, cross-linked, modified ethylene-tetrafluoroethylene (ETFE)
Heat rating: 150¸C (302¸F)
Voltage rating: 600V

Please select wire color (solid) and spool length (in feet) when ordering.

**Wire stock may vary, we will contact if there are any stock issues with an order.

For orders larger than 1000ft please contact us at sales@

Genuine connector kit for the Bosch LK-2 EV1 fuel injectors. Kit is available in single, four, or eight pack and includes the following;

Single Pack

Connector housing x 1
Socket terminal (24-20 AWG) x 3 (one extra provided)
90 degree rubber boot x 1

Four Pack

Connector housing x 4
Socket terminal (24-20 AWG) x 10 (two extra provided)
90 degree rubber boot x 4

Eight Pack

Connector housing x 8
Socket terminal (24-20 AWG) x 20 (four extra provided)
90 degree rubber boot x 8

Ten Pack

Connector housing x 10
Socket terminal (24-20 AWG) x 24 (four extra provided)
90 degree rubber boot x 10

Genuine factory OEM connector kit for Toyota / Lexus 1-pin factory starter, dealer part # 90980-11400, compatible with stock terminal and wire. If you need to replace a cracked or broken OEM housing, simply de-pin and replace with this one, crimping on new terminals only if desired.

Connector kit includes the following;

Connector housing x 1
Wire seal x 1 (sized for M22759 Tefzel wire)
Socket terminal (20-16 AWG) x 1

If you are unsure on fitment, please reference photos carefully. Item pictured is exact item you will receive.

Genuine OEM connector kit for the Honda K-Series factory ignition coilpack, compatible with stock terminals and wire. If you choose to replace a deteriorated OEM housing, simply de-pin and replace with this one, crimping on new terminals only if desired.

Kit is available in single, four, or eight pack and includes the following;

Single Pack

Connector housing x 1
Wire seal x 3 (sized for M22759 Tefzel wire)
Socket terminal (22-20 AWG) x 4 (one extra provided)

Four Pack

Connector housing x 4
Wire seal x 12 (sized for M22759 Tefzel wire)
Socket terminal (22-20 AWG) x 14 (two extra provided)

Eight Pack

Connector housing x 8
Wire seal x 24 (sized for M22759 Tefzel wire)
Socket terminal (22-20 AWG) x 28 (four extra provided)

If you are unsure on fitment, please reference photos carefully. Item pictured is exact item you will receive.

Genuine new stock 18 AWG M22759/32 Tefzel Wire.

Specifications are below;

Conductor material: Tinned plated copper
Insulation: Single layer, cross-linked, modified ethylene-tetrafluoroethylene (ETFE)
Heat rating: 150¸C (302¸F)
Voltage rating: 600V

Please select wire color (solid) and spool length (in feet) when ordering.

**Wire stock may vary, we will contact if there are any stock issues with an order.

For orders larger than 1000ft please contact us at sales@

Genuine OEM connector kit for the Honda S2000 (F20/F22) factory 2-pin fuel injector, compatible with stock terminals and wire. If you choose to replace a broken or cracked OEM housing, simply de-pin and replace with these, crimping on new terminals only if desired.

Kit is available in single, four, or eight pack and includes the following;

Single

Connector housing x 1
Wire seal x 2 (sized for M22759 Tefzel wire)
Socket terminal (22-20 AWG) x 3 (one extra provided)

Four Pack

Connector housing x 4
Wire seal x 8 (sized for M22759 Tefzel wire)
Socket terminal (22-20 AWG) x 10 (two extra provided)

Eight Pack

Connector housing x 8
Wire seal x 16 (sized for M22759 Tefzel wire)
Socket terminal (22-20 AWG) x 20 (four extra provided)

Please look closely at photos if unsure for compatibility, photo is of actual item.

Genuine Deutsch DTP connector kit, 2-way. Kit is available in single, three, or five pack and includes the following;

Single Pack

DTP04-2P receptacle (pin) housing x 1
Size 12 (14-12 AWG) MIL-Spec gold pin solid contact x 3 (one extra provided)
Wedgelock x 1

DTP06-2S plug (socket) housing x 1
Size 12 (14-12 AWG) MIL-Spec gold socket solid contact x 3 (one extra provided)
Wedgelock x 1

Three Pack

DTP04-2P receptacle (pin) housing x 3
Size 12 (14-12 AWG) MIL-Spec gold pin solid contact x 8 (two extra provided)
Wedgelock x 3

DTP06-2S plug (socket) housing x 3
Size 12 (14-12 AWG) MIL-Spec gold socket solid contact x 8 (two extra provided)
Wedgelock x 3

Five Pack

DTP04-2P receptacle (pin) housing x 5
Size 12 (14-12 AWG) MIL-Spec gold pin solid contact x 12 (two extra provided)
Wedgelock x 5

DTP06-2S plug (socket) housing x 5
Size 12 (14-12 AWG) MIL-Spec gold socket solid contact x 12 (two extra provided)
Wedgelock x 5

Genuine factory connector kit for Bosch EV6 EV14 USCAR fuel injectors. Also commonly used on ID1300 and ID1700 injectors.

Kit includes the following;

Single Pack

Connector housing x 1
Wire seal x 2
Socket terminal (22-20 AWG) x 3 (one extra provided)

Four Pack

Connector housing x 4
Wire seal x 8
Socket terminal (22-20 AWG) x 10 (two extra provided)

Six Pack

Connector housing x 6
Wire seal x 12
Socket terminal (22-20 AWG) x 14 (two extra provided)

Eight Pack

Connector housing x 8
Wire seal x 16
Socket terminal (22-20 AWG) x 20 (four extra provided)

Ten Pack

Connector housing x 10
Wire seal x 20
Socket terminal (22-20 AWG) x 24 (four extra provided)

Please select pack size when ordering.

Genuine OEM connector kit for the Lexus IS300 2JZ-GE's factory coilpack, compatible with stock terminals and wire. If you choose to replace a deteriorated OEM housing, simply de-pin and replace with this one, crimping on new terminals only if desired.

Kit is available in single, three, or six pack and includes the following;

Single Pack

Connector housing x 1
Wire seal x 2 (sized for M22759 Tefzel wire)
Socket terminal (22-20 AWG) x 3 (one extra provided)

Three Pack

Connector housing x 3
Wire seal x 6 (sized for M22759 Tefzel wire)
Socket terminal (22-20 AWG) x 8 (two extra provided)

Six Pack

Connector housing x 6
Wire seal x 12 (sized for M22759 Tefzel wire)
Socket terminal (22-20 AWG) x 16 (four extra provided)

Genuine OEM connector kit for Toyota Lexus (dealer part # 90980-11349) 3-pin factory oval alternator, compatible with stock terminals and wire. If you choose to replace a deteriorated OEM housing, simply de-pin and replace with this one, crimping on new terminals only if desired. Kit includes the following;

Connector housing x 1
Wire seal x 3 (sized for M22759 Tefzel wire)
Cavity plug x 1
Terminal (22-20 AWG) x 4 (one extra provided)

If you are unsure on fitment, please reference photos carefully. Item pictured is exact item you will receive.

Genuine OEM connector kit for Nissan R35 GTR 3-pin factory coilpack, compatible with stock terminals and wire. If you choose to replace a deteriorated OEM housing, simply de-pin and replace with this one, crimping on new terminals only if desired. Kit is available in single, four, six, or twelve pack.

Single Kit includes the following;

Connector housing x 1
Secondary Lock x 1
Wire seal x 3 (sized for M22759 Tefzel wire)
Socket terminal (22-20 AWG) x 4 (one extra provided)

4-Pack includes the following;

Connector housing x 4
Secondary Lock x 4
Wire seal x 12 (sized for M22759 Tefzel wire)
Socket terminal (22-20 AWG) x 14 (two extra provided)

6-Pack includes the following;

Connector housing x 6
Secondary Lock x 6
Wire seal x 18 (sized for M22759 Tefzel wire)
Socket terminal (22-20 AWG) x 22 (four extra provided)

12-Pack includes the following;

Connector housing x 12
Secondary Lock x 12
Wire seal x 36 (sized for M22759 Tefzel wire)
Socket terminal (22-20 AWG) x 44 (eight extra provided)

Genuine factory OEM connector kit for Honda K-Series (K20/K24) engine 2-pin factory reverse light switch, compatible with stock terminals and wire. If you need to replace a broken or cracked OEM housing, simply de-pin and replace with this one, crimping on new terminals only if desired. Kit includes the following;

Connector housing x 1
Wire seal x 2 (sized for M22759 Tefzel wire)
Socket terminal (22-20 AWG) x 3 (one extra provided)

Genuine OEM GM Delphi GT150 2-pin intake air temperature connector kit used across various GM vehicles. This version of the connector is push-to-seat for easier terminal installation, and includes the secondary lock.

Kit includes the following;

Connector housing x 1
Wire seal x 2 (sized for M22759 Tefzel wire)
Terminal (22-20 AWG) x 3 (one extra terminal provided)
Secondary lock x 1

If you are unsure on fitment, please reference photos closely. Item pictured is exact item you will receive.

Genuine OEM connector kit for the GM Continental Flex Fuel sensors, compatible with stock terminals and wire. If you choose to replace a deteriorated OEM housing, simply de-pin and replace with this one, crimping on new terminals only if desired.

Kit includes the following;

Connector housing x 1
Wire seal x 3 (sized for M22759 Tefzel wire)
Socket terminal (22-20 AWG) x 4 (one extra provided)
Secondary lock x 1

Genuine OEM connector kit for the Lexus IS300's 2JZ-GE factory throttle position sensor (TPS) compatible with stock terminals and wire. If you choose to replace a deteriorated OEM housing, simply de-pin and replace with this one, crimping on new terminals only if desired. Kit includes the following;

Connector housing x 1
Wire seal x 4 (sized for M22759 Tefzel wire)
Cavity plug x 1
Socket terminal (22-18 AWG) x 5 (one extra provided)

Genuine factory OEM connector kit for Honda K-Series (K20/K24) 2-way factory water coolant temperature sensor, compatible with stock terminals and wire. If you need to replace a broken or cracked OEM housing, simply de-pin and replace with this one, crimping on new terminals only if desired. Kit includes the following;

Connector housing x 1
Wire seal x 2 (sized for M22759 Tefzel wire)
Socket terminal (22-20 AWG) x 3 (one extra provided)
Secondary lock x 1

Raychem RT-375 Clear, Flame-Resistant, Flexible, Fluoropolymer Tubing.

Per manufacturer;

Applications; Protects wire and cable markers subject to extreme abuse, while permitting full inspectability of each item covered. Provides bundling and jacketing of wires and cables, protecting them from mechanical and chemical abuse. Protects electronic components while permitting their identification and inspection.

Product Facts;

2:1 shrink ratio
Exceptional clarity and clarity stability
Toughness, chemical resistance, and high-temperature performance
High flame-resistance
Approximately 40 percent thinner walls than most general purpose polyolefin tubings
Recommended maximum temperature for use as a primary insulator: 135°C [275°F]
RoHS compliant
Installation; Minimum shrink temperature: 125°C [257°F], Minimum full recovery temperature: 150°C [302°F]
Operating Temperature Range; -55°C to 150°C [-67°F to 302°F]

Please select size and how many feet (quantity) when ordering.

Genuine OEM connector kit for the Denso 2-way pencil coil commonly found on many Honda, Kawasaki, Suzuki, and Yahama motorcycles, compatible with stock terminals and wire. If you need to replace a deteriorated OEM housing, simply de-pin and replace with this one, crimping on new terminals only if desired.

Kit is available in single, four, or eight pack and includes the following;

Single Pack

Connector housing x 1
Wire seal x 2 (sized for M22759 Tefzel wire)
Socket terminal (22-20 AWG) x 3 (one extra provided)
Secondary lock x 1

Four Pack

Connector housing x 4
Wire seal x 8 (sized for M22759 Tefzel wire)
Socket terminal (22-20 AWG) x 10 (two extra provided)
Secondary lock x 4

Eight Pack

Connector housing x 8
Wire seal x 16 (sized for M22759 Tefzel wire)
Socket terminal (22-20 AWG) x 20 (four extra provided)
Secondary lock x 8

If you are unsure on fitment, please reference photos carefully. Item pictured is exact item you will receive.

Genuine factory OEM connector kit for Honda's K-Series K24 factory 3-pin cam position sensor, compatible with stock terminals and wire. If you choose to replace a deteriorated OEM housing, simply de-pin and replace with these, crimping on new terminals only if desired. Kit includes the following;

Connector housing x 1
Wire seal x 3 (sized for M22759 Tefzel wire)
Socket terminal (22-20 AWG) x 4 (one extra provided)
Secondary Lock x 1

Genuine OEM connector kit the Toyota Supra 2JZ-GTE 2-pin factory cam angle position sensor, compatible with stock terminals and wire. If you choose to replace a deteriorated OEM housing, simply de-pin and replace with this one, crimping on new terminals only if desired.

Kit includes the following;

Connector housing x 1
Wire seal x 2 (sized for M22759 Tefzel wire)
Gold terminal x 3 (one extra provided)

If you are unsure on fitment, please reference photos carefully. Item pictured is exact item you will receive.

Genuine new stock 22 AWG M22759/32 Tefzel Wire.

Specifications are below;

Conductor material: Tinned plated copper
Insulation: Single layer, cross-linked, modified ethylene-tetrafluoroethylene (ETFE)
Heat rating: 150¸C (302¸F)
Voltage rating: 600V

Please select wire color (solid) and spool length (in feet) when ordering.

**Wire stock may vary, we will contact if there are any stock issues with an order.

For orders larger than 1000ft please contact us at sales@

Genuine OEM GM Delphi GT150 2-pin coolant temperature connector kit used across various GM vehicles. This version of the connector is push-to-seat for easier terminal installation, and includes the secondary lock.

Kit includes the following;

Connector housing x 1
Wire seal x 2 (sized for M22759 Tefzel wire)
Socket Terminal (22-20 AWG) x 3 (one extra terminal provided)
Secondary lock x 1

If you are unsure on fitment, please reference photos closely. Item pictured is exact item you will receive.

Genuine OEM connector kit for the Toyota Lexus 2JZ-GE and 2JZ-GTE 1-pin knock sensor, compatible with stock terminals and wire. If you choose to replace a deteriorated OEM housing, simply de-pin and replace with this one, crimping on new terminals only if desired. Kit includes the following;

Connector housing x 1
Wire seal x 1 (sized for M22759 Tefzel wire)
Socket terminal (22-20 AWG) x 2 (one extra provided)

Battery cable boots, designed for 8 to 2 AWG wire. Commonly used on alternators, battery junctions blocks, etc.

Please select color when ordering.

Socket Terminal for Bosch EV6 EV14 USCAR Fuel Injector Connector (22-20 AWG).

Priced and sold individually.

Genuine factory Bosch/Delphi EV1 2-pin fuel injector connector.

Kit is available in multiple pack sizes, please select when ordering.

Single Pack

Connector housing x 1
Socket terminal (24-20 AWG) x 3 (one extra provided)

Four Pack

Connector housing x 4
Socket terminal (24-20 AWG) x 10 (two extra provided)

Eight Pack

Connector housing x 8
Socket terminal (24-20 AWG) x 20 (four extra provided)

Ten Pack

Connector housing x 10
Socket terminal (24-20 AWG) x 20 (three extra provided)

Twenty Pack

Connector housing x 20
Socket terminal (24-20 AWG) x 40 (six extra provided)

If you are unsure on fitment, please reference photos carefully. Item pictured is exact item you will receive.

Connector kit for use with Delphi GT150 3-pin pressure transducer terminations. Kit includes the following;

Connector housing x 1
Wire seal x 3 (sized for M22759 Tefzel wire)
Socket terminal (22-20 AWG) x 4 (one extra terminal provided)
Rubber Boot (90 degrees) x 1

Genuine factory OEM connector kit for Honda K24 3-pin crank angle sensor (CAS), compatible with stock terminals and wire. If you need to replace a broken or cracked OEM housing, simply de-pin and replace with this one, crimping on new terminals only if desired. Kit includes the following;

Connector housing x 1
Wire seal x 3 (sized for M22759 Tefzel wire)
Socket terminal (22-20 AWG) x 4 (one extra provided)

***There are two different common keyways to this connector for K24 crank, both are pictured here. Please select either 'Top Key' or 'Low Key' depending upon your application. The 'Low Key' connector is more common on K24A2. If you are not sure which key you need, please call or email us and we will assist.

Genuine Deutsch DT connector kit, 2-way. Kit is available in single, three, or five pack and includes the following;

Single Pack

DT04-2P receptacle (Pin) housing x 1
Size 16 (20-16 AWG) MIL-Spec gold pin solid contact x 3 (one extra provided)
Wedgelock x 1

DT06-2S-E008 plug (Socket) housing w/ shrink boot adapter x 1
Size 16 (20-16 AWG) MIL-Spec gold socket solid contact x 3 (one extra provided)
Wedgelock x 1

Three Pack

DT04-2P receptacle (Pin) housing x 3
Size 16 (20-16 AWG) MIL-Spec gold pin solid contact x 8 (two extra provided)
Wedgelock x 3

DT06-2S-E008 plug (Socket) housing w/ shrink boot adapter x 3
Size 16 (20-16 AWG) MIL-Spec gold socket solid contact x 8 (two extra provided)
Wedgelock x 3

Five Pack

DT04-2P receptacle (Pin) housing x 5
Size 16 (20-16 AWG) MIL-Spec gold pin solid contact x 12 (two extra provided)
Wedgelock x 5

DT06-2S-E008 plug (Socket) housing w/ shrink boot adapter x 5
Size 16 (20-16 AWG) MIL-Spec gold socket solid contact x 12 (two extra provided)
Wedgelock x 5

Genuine OEM connector kit for the Honda S2000 F20C and F22C factory ignition coil pack, compatible with stock terminals and wire. If you choose to replace a deteriorated OEM housing, simply de-pin and replace with this one, crimping on new terminals only if desired.

Kit is available in single, four, or eight pack and includes the following;

Single Pack

Connector housing x 1
Wire seal x 3 (sized for M22759 Tefzel wire)
Socket terminal (22-20 AWG) x 4 (one extra provided)

Four Pack

Connector housing x 4
Wire seal x 12 (sized for M22759 Tefzel wire)
Socket terminal (22-20 AWG) x 14 (two extra provided)

Eight Pack

Connector housing x 8
Wire seal x 24 (sized for M22759 Tefzel wire)
Socket terminal (22-20 AWG) x 28 (four extra provided)

If you are unsure on fitment, please reference photos carefully. Item pictured is exact item you will receive.

Genuine factory OEM connector kit for Honda's K-Series K20 factory 3-pin crank position sensor, compatible with stock terminals and wire. If you choose to replace a broken or cracked OEM housing, simply de-pin and replace with these, crimping on new terminals only if desired. Kit includes the following;

Connector housing x 1
Wire seal x 3 (sized for M22759 Tefzel wire)
Socket terminal (22-20 AWG) x 4 (one extra provided)
Secondary Lock x 1

Genuine OEM connector kit for the 1999-2007 (Gen I) Suzuki Hayabusa 2-way ignition coil, compatible with stock terminals and wire. If you need to replace a deteriorated OEM housing, simply de-pin and replace with this one, crimping on new terminals only if desired.

Kit is available in single, four, or eight pack and includes the following;

Single Pack

Connector housing x 1
Wire seal x 2 (sized for M22759 Tefzel wire)
Socket terminal (22-20 AWG) x 3 (one extra provided)
Secondary lock x 1

Four Pack

Connector housing x 4
Wire seal x 8 (sized for M22759 Tefzel wire)
Socket terminal (22-20 AWG) x 10 (two extra provided)
Secondary lock x 4

Eight Pack

Connector housing x 8
Wire seal x 16 (sized for M22759 Tefzel wire)
Socket terminal (22-20 AWG) x 20 (four extra provided)
Secondary lock x 8

If you are unsure on fitment, please reference photos carefully. Item pictured is exact item you will receive.

Genuine OEM connector kit for the common 3-pin turbo speed sensor used on Borg Warner turbochargers, compatible with stock terminals and wire. If you choose to replace a deteriorated OEM housing, simply de-pin and replace with this one, crimping on new terminals only if desired.

Kit includes the following;

Connector housing x 1
Wire seal x 3 (sized for M22759 Tefzel wire)
Socket terminal (22-20 AWG) x 4 (one extra terminal provided)

If you are unsure on fitment, please reference photos carefully. Item pictured is exact item you will receive.

20x Terminal Kit for M&W CDI Ignition Connector Plug Pro-16 Pro-18 Pro16 Pro18

APPLICATIONS:, Autronic - SMC, MoTeC - M4 / M48 / M2R / MLS, Wolf - 3D V3 / 3D V4, M&W - Pro-16B, Pro-16C, Pro-16D, Pro-18B, Pro-18C, and Pro-18D

Connector Set 36 Pin

KSV Looms Motorsport Wiring

The Raw Brokerage M&W Pro 16 CDI kit consists of (1) M&W Pro 16 ignition amplifier and a full custom-built wire harness. Our harness uses high quality