9 x 16 1-1/2 HP Metal-Cutting Bandsaw - Grizzly Industrial

4.7 (778) · € 21.00 · Auf Lager

Grizzly G0803Z – 9″ Benchtop Bandsaw with Laser Guide – CT Power Tools

KAKA INDUSTRIAL Metal Bandsaw, 7 X 12 Metal Cutting Band Saw,4 step blade speeds by

This saw is built for accuracy and production! Easy angle set-ups between 0 and 60 degrees means no wasted time between cuts. Lever controlled blade guide locks allow adjustments right up to the work piece for optimum support and the blade guides have fully adjustable ball bearings so you know you're going to get straight cuts. And when you're done, use the quick release lever and stock length stop to get on with the next cut.

Grizzly G0613 Swivel Metal-Cutting Bandsaw, 7 x 8-1/4-Inch

It features a 5 in. round and 5 in. x 6 in. rectangular capacity. But what really sets this apart from other saws of this size is the head swivel giving a maximum angle of cut of 60 Remember how much trouble it is to change a vise backing jaw only to get a 45 cut. Not with this guy. The easy-to-adjust head has stops in all the right places. And because the vise backing jaw is rigid on this saw it is taller giving it the ability to support the workpiece better.

Grizzly G9742 5 x 6 Metal-Cutting Bandsaw w/ Swivel Head

DescriptionThe G0806 is the 14 little brother to Grizzlys G0807 18 Vertical Metal-Cutting Bandsaw. It offers all the same great features but in a smaller package. Variable-speed blade controls allow for blade speed adjustments from 88384 FPM. The adjustable work light and chip blower keep the work table clean and bright for both safety and precision.

Grizzly Industrial G0806 14 inch 1-1/2 HP Variable-Speed Vertical Metal-Cutting Bandsaw

The G0811 9 x 16 1-1/2 HP Metal-Cutting Bandsaw can handle anything you throw at it thanks to the 114-1/2 blade and the quick-release vise on the 6-1/2 x 31 table. It has maximum cutting capacities of 9 round stock and 5 x 16 rectangular stock (at 90°). The speed at which the saw blade will cut through a workpiece is controlled by blade type, feed rate, and feed pressure.

Grizzly G0811 9 x 16 1-1/2 HP Metal-Cutting Bandsaw

Cut round and rectangular metal workpieces at blade speeds between 85 and 195 FPM (Feet Per Minute). Speed adjustments are as simple as rotating the blade speed dial until the speed display shows the speed desired. The vise consists of a movable jaw and fixed jaw and can hold material up to 6 in. deep and be set to cut angles from 0° to 45°. The portable platform with built-in wheels and retractable handle make it ideal for storing away or moving to where ever the job requires.